Place the heaviest filled box at the proposed workstation height. Time presenting the strap, repositioning for the next band and removing the finished carton.
KPW-750 · CARTON PACKING STATIONS
A semi-automatic tabletop strapping station combines manual package handling with machine tensioning and sealing. For the KPW-750, start with carton dimensions, filled weight, straps per carton and your intended PP or PET strap specification. These determine the handling arrangement and a useful output trial.
Request a carton strapping setup Paper banding or PP strapping?
Choose the strap specification together with the package and sealing setup. For PET, provide the strap width, thickness and reel dimensions so the quoted configuration can be checked. The PP size range in the catalogue image below is a PP reference; it does not define the PET operating range.
A change from PP to PET should include a sample strapping test using the proposed consumable. Confirm feeding, tension, seal quality and the condition of the carton after handling before using the settings in production.
Semi Automatic Strapping Machine /PP and PET Strap Packing Machine
Introduction of Semi Automatic Strapping Machine:
The semi automatic strapping machine /strap machine /pp strap packing machine uses a strap to bind the product or package, then tighten it and combine the two ends with a heating iron. Strapping helps hold the package together, but it does not by itself verify protection during handling or transport. For your filled carton, confirm strap positions and tension, inspect the seal and carton condition, and agree the handling checks required for the intended shipment.


Catalogue parameter chart — PP reference; confirm PET specifications separately

Features of Semi Automatic Strapping Machine:
Simple Control Panel
Use the control panel according to the instructions for the quoted machine. Confirm the feed, tensioning and sealing setup using your actual strap and filled carton.
Stable Dual Motors
The dual-motor arrangement is part of the machine configuration. Include routine inspection and maintenance in the workstation plan; confirm operating conditions and the required duty pattern with the supplied manual.
Premium Clutch
Inspect and maintain the clutch as specified in the machine manual. Report abnormal engagement or wear rather than assuming a component is maintenance-free.
High Quality Adjustable Spring
The adjustable spring forms part of the tensioning arrangement. Follow the machine instructions and check the finished package; more tension is not automatically better for a lightweight carton.
Integrated Circuit Board
The integrated control board supports the machine control functions. Electrical inspection and servicing should follow the supplied manual and be carried out by qualified personnel.
High-Quality Widen Ironing Head
Keep the sealing head in the condition specified by the machine instructions. Confirm the joining setup and sample result for the actual PP or PET consumable; do not assume one setting suits all straps.
Two Types of Strapping Machines:High Table and Low Table

High-table layout: compare the carton loading height with the adjoining workbench and the operator handling method.
Low-table layout: plan how the filled carton is loaded and removed, including any handling aid. Confirm the permitted package load for the quoted configuration.
Product Strapping Effect:

Check the finished carton with its actual contents. Agree strap positions, acceptable panel compression and the condition of corners after handling. A tighter strap is not automatically a better result on lightweight board.
The illustrations show more than one table layout. Choose using the carton loading height, weight, transfer method and surrounding workbench. Confirm which machine is quoted and how the operator moves the carton through the station.
| Send this information | Confirm this detail |
|---|---|
| Smallest and largest carton, filled weight and support needs | Table layout and package handling; the absence of a fixed arch is not unlimited load capacity |
| PP or PET strap width, thickness and reel details | Feed, tension and sealing setup for the specified consumable |
| Cartons per shift and straps per carton | A complete operator cycle including turning and unloading the package |
| Workstation sketch and supply voltage, phase and frequency | Installation layout and the exact electrical configuration in the quotation |
The page lists 1.5 seconds per strap. Treat this as a machine-cycle reference, not a guaranteed cartons-per-hour rate. Ask for a timed demonstration including loading, strap routing, additional bands and unloading for your carton.
A semi-automatic table workflow requires the operator to place the carton and route the strap as instructed for the quoted machine. If your process needs automatic package transfer and strap routing, specify a different automation scope rather than assuming it is included.
Record the carton and strap specifications, settings, seal appearance, carton deformation and completed packs over a representative period. Agree suitable package-handling checks for the intended shipment before accepting the result.
Send a carton photo, dimensions, filled weight, PP or PET strap details, target shift output and site power supply. For presentation bundles or printed stacks, compare the KPW-SDJ150 paper banding machine.
Two-year warranty, free replacement parts and shipping during the warranty period, and lifetime service and technical support.
No fixed arch does not mean unlimited package weight or unsupported overhang. Confirm the filled-carton dimensions, weight and loading method for the quoted table. Also select the electrical configuration in writing; the listed voltage options do not establish automatic switching for every delivered unit.
This is a purchasing check. Installation and electrical work require the supplied instructions and qualified personnel.
Strapping machine power supply: order and handover checklist

Mobile:+86-18206519878
Tel:+86-18206519878
Whatsapp:8618206519878
Email:sales@kbwmachinery.com
Add:Wanda Plaza, Fuqiao Street, Rencheng District, Jining City, Shandong Province, China