Add: Wanda Plaza, Fuqiao Street, Rencheng District, Jining City, Shandong Province, China
+86-18206519878
   Home > News > Stick Pack Coding Layout: Map the Film W…

Stick Pack Coding Layout: Map the Film Web to the Finished Pack

Stick Pack Coding Layout: Map the Film Web to the Finished Pack

“Put the lot code on the front” is not a complete instruction for printed roll film. The film converter sees a full-width repeat; the equipment supplier sees separate lane strips and their forming paths; the buyer sees a finished stick. A useful stick pack coding layout connects these views before the production artwork is released.

The objective is a shared drawing, not a universal printer position. In NOMATECH's published stick-pack marking project, coding takes place before film separation and forming. This is one configuration example, not confirmation that a Keepway machine uses the same arrangement.

Two views, one revision

Ask the film converter and equipment supplier to review a full-web view and a finished-pack view together. Give both the same artwork revision and use matching labels for each proposed coding window. Identify the viewing side of the film; “left” on a drawing is ambiguous if another reviewer is looking from the reverse side.

Suggested artwork handoff: what the two views must connect
ViewShow on the drawingResolve before approval
Full film web: one repeatFilm travel arrow, viewing side, repeat boundaries, lane identifiers, proposed slitting lines, preprinted artwork, registration marks and labelled coding windows.Which strip and repeat contain each window? Ask the suppliers to mark actual dimensions and references rather than estimating from a screenshot.
Finished stick: front and backMatching lane/window labels, intended reading direction, longitudinal joint or seal, cross seals, cut edges and any planned opening feature.Where does each window appear after forming? Does its orientation and visible face match the buyer's intended presentation?

Do not assume that lane layouts are identical, mirrored or interchangeable. Have the supplier explain the correspondence for the proposed arrangement. These are procurement drawings, not instructions for threading film or adjusting cutters.

Keep the registration mark separate from the variable code

In multilane film artwork registration discussions, distinguish the preprinted registration mark used as a positioning reference from changing date or lot information. Showing the registration mark does not approve the stick pack date code position. Mark the proposed variable-code window separately, with its label carried through to the finished-pack drawing.

An illustrative review discrepancy

Suppose a flat-film proof shows “Window A” in the middle of one strip, but the finished-pack proof shows only a front panel without identifying which film edges form the longitudinal joint. The drawings do not yet establish that Window A becomes the intended front-face code area. Ask the suppliers to connect the same label across both views and clarify the final reading direction.

This is an illustrative design-review example, not a customer incident or test result. A clear flat-film proof alone does not settle the finished location.

Approve the actual position, not a generic clearance

There is no universal seal keep-out distance in this guide. Mespack's coding-system examples include embossing in a vertical sealing area. The equipment and film suppliers should therefore approve the proposed window for the selected marking method, material and forming/sealing arrangement, rather than applying a blanket rule that no code may be on a seal.

Close the drawing handoff

A practical division of review is: the buyer confirms the intended visible face and information; the converter confirms film construction and artwork revision; the equipment or coding integrator confirms the reachable window and its relationship to forming, sealing and cutting. Record outstanding decisions on the same revision. This is a suggested workflow, not a statement of contractual responsibilities.

For the Keepway multi-lane powder stick pack machine, request confirmation of the actual coding arrangement and supply scope; this guide does not establish an included printer, inspection system or rejection function. Once the drawing is agreed, use the separate lane-by-lane sample evaluation guide to plan physical evaluation. Drawing approval is not finished-pack acceptance.

Discuss your film artwork and powder packing configuration