Add: Wanda Plaza, Fuqiao Street, Rencheng District, Jining City, Shandong Province, China
+86-18206519878
   Home > News > Will a Folded Garment Fit the Poly Maile…

Will a Folded Garment Fit the Poly Mailer Before Sealing?

Will a Folded Garment Fit the Poly Mailer Before Sealing?

A folded T-shirt may slide into a mailer that catches on a hoodie's zipper. Both can have the same width on the packing table. For a horizontal courier bag packing machine, the buying question is whether an operator can load the actual order, let it settle and leave the closing area clear on the proposed bag roll.

Measure the order as it arrives at the bagger

Use a flat surface and the fold your team actually uses. Record length, width and the thickest point after the packer lets go. Include any inner sleeve, hanger, insert or second item that ships with the order. Photograph the thickest point from the side with a ruler in the frame. A compressed stack measured under a hand can expand before the bag closes.

Measure the usable opening on the actual roll

Ask the bag supplier to identify the lay-flat width, opening direction, usable length and any perforation or presealed area on a sample. Label those dimensions on a photo. Nominal bag width alone cannot tell you whether the corners of a folded sweater will pass through the mouth or how much film remains beyond it. Ask which dimension a quoted bag range describes before comparing models.

Run three packs through the same check

  • Light, flat order: Load a normal single garment as a reference. Note the orientation and whether the packer has to reach in again to straighten it.
  • Bulkiest normal order: Try a fleece or sweatshirt at its thickest fold. After release, see whether a sleeve or hood springs into the closing area.
  • Awkward mixed order: Add the insert or accessory you normally ship. Check whether a tag or corner catches at the opening or moves toward the seal as the bag advances.

For each pack, record garment dimensions, bag reference, loading orientation, whether repositioning was needed and the appearance of the finished seal. Inspect the closed sample after discharge. Set your own acceptance criteria with your supplier, including how the seam will be checked. A visual check alone cannot establish seal strength.

Use the failure to choose the next trial

If the garment catches at the mouth while plenty of film remains past the opening, trial a different fold or a wider opening. If it loads freely but the garment reaches the seal, investigate usable length and orientation. Change one variable per trial. Record any extra folding or repositioning time before agreeing on a bag that fits only with extra handling.

Request a configuration for your garment mix

The Keepway KPW-550/650 horizontal courier bag packing machine uses manual product loading with automatic bag opening and sealing. Ask for the proposed model and roll format to be identified on the same trial record. Send the folded dimensions and thickness for your three packs, a photo of the actual roll or its drawing, and your target finished orders per shift. If sizing is still open, send the garment photos first and identify which pack is causing difficulty.

Ask about garment bag fit