A filled poly mailer is not a rigid carton. Its shape may change when its contents settle or the parcel is handled. Before choosing a dimensioning, weighing and scanning station, establish whether the proposed configuration can measure the actual parcels you dispatch, and what evidence will support acceptance.
This review covers parcel dimension measurement only; it does not replace separate weighing, barcode-reading or complete DWS acceptance tests. Any blank record sheet is a planning tool, not a test result.
This is a buyer's sample-test plan, not a claim that a Keepway configuration has already passed a soft-bag trial. The Keepway DWS product page recommends assessment with representative samples for flexible, irregular, reflective or transparent packages. Confirm suitability before placing any sample on the equipment.
Use the filled, closed parcel in its normal dispatch condition. An empty bag's flat width and length do not describe that object's three-dimensional shape. If your business needs a different measurement, state the purpose explicitly.
Ask the supplier how the quoted configuration defines length, width and height for the approved parcel shapes. Which orientation is required? What counts as a valid result? Which shapes and surfaces fall outside its scope? Platform size is not a substitute for the confirmed parcel measurement envelope.
Explain how the result will be used. Internal space planning and a result accepted for another business purpose can have different requirements. A displayed dimension or repeated reading alone does not establish suitability for billing. If that is your intended use, obtain the applicable approval evidence for the quoted configuration and use case before acceptance.
Start with the parcel families you actually send, rather than a single convenient bag. Ask the supplier which samples are permitted and how they should be handled in the trial.
| Sample group | What to vary or identify | What the review should establish |
|---|---|---|
| A stable carton, if approved | Filled dimensions, surface and reference identity | A separate baseline for the agreed measurement procedure |
| Your usual opaque poly mailers | Actual small, large and common orders; contents arrangement | Whether those filled forms are within the quoted scope |
| Soft or unevenly filled mailers | The normal packing and handling states that alter the shape | Which states can be measured and under what restrictions |
| Reflective, transparent, cylindrical or other unusual parcels | Photographs and representative samples submitted for prior review | Whether they may enter the trial at all |
The carton result cannot prove that a soft bag will work. A successful trial with one mailer does not approve every material, filling pattern or size. Record excluded samples as outside scope, rather than omitting them from the purchasing decision.
Agree two different observations with the supplier. First, examine repeated measurements of an approved sample under the same permitted presentation and operating procedure. Then, if relevant and permitted, examine the states produced by normal handling or repositioning.
Photograph the parcel's shape and orientation for each run. If the contents move and the bag becomes taller or wider, the object being measured has changed. Keep that distinction visible instead of treating every difference as a machine error.
Do not compress, stretch or rearrange a bag simply to obtain a smaller number. Use the actual dispatch condition and the supplier-approved operating procedure. Keep all recorded runs, including no-reads and unresolved results, rather than selecting only the most convenient output.
Repeatability and accuracy are different questions. Similar readings do not establish that the measured dimensions agree with an appropriate reference.
Before calculating a difference, agree the dimension definition, reference method, parcel state and orientation, and how uncertainty in the reference will be handled. A reference for one shape or measurement definition may not be comparable with another. Where there is no agreed reference, record the output as an observation; do not label it a verified error or accuracy result.
Before the trial, the parties should agree the sample count, repetitions and acceptance limits for the project. This guide supplies no universal tolerance or pass percentage, and it does not transfer a weighing tolerance to length, width or height.
Use one sample identifier and a separate run identifier. Record the configuration, packed-state photograph, orientation, operator handling, and any displayed length, width, height and units. Copy the device's status as shown. Separately record whether the sample is within the agreed scope and whether the reviewer accepts the result. Add a reference comparison only where the agreed method applies.
This is a buyer-maintained review sheet. Use manual entries or agreed exported evidence; the fields below do not imply that the equipment provides an export or automatically classifies results. Blank record template, not test data:
| Field | Value to complete during the agreed review |
|---|---|
| Intended use and dimension definition | Purpose, agreed L/W/H definition and units |
| Configuration | Equipment/configuration identifier and software version where applicable |
| Sample and run | Parcel family, sample ID, run ID and packed-state photograph |
| Presentation | Approved orientation, visible surface condition and operator handling |
| Device observation | Displayed L/W/H and units, device status as shown, or no result obtained |
| Scope and review status | Within / outside agreed scope; accepted / unresolved / rejected, with the reviewer's reason |
| Reference, if agreed | Method, comparable parcel state and difference only where meaningful |
| Decision | Supported / restricted / not supported / not demonstrated; owner and open actions |
For each parcel family, document one decision: supported under the demonstrated conditions; supported with specified restrictions; not supported by the proposed configuration; or not yet demonstrated. Name the person responsible for resolving open points before the measurements are used. A missing result must not become an accepted zero.
Keep the question of which parcel owns each record separate. The DWS parcel data-matching guide addresses that association; this sample review addresses the suitability and measurement of the physical parcel itself.
Keepway's published DWS options include an operator-loaded static platform and an operator-loaded station with belt-assisted discharge after scanning. Neither description establishes soft-mailer compatibility or continuous high-speed in-motion measurement.
Send photographs of representative filled mailers, your parcel families and size/weight range, the intended use of the dimensions, and your handling sequence. Ask the quotation to identify the supported objects, measurement definition and envelope, operating restrictions and remaining acceptance conditions.
Mobile:+86-18206519878
Tel:+86-18206519878
Whatsapp:8618206519878
Email:sales@kbwmachinery.com
Add:Wanda Plaza, Fuqiao Street, Rencheng District, Jining City, Shandong Province, China