Start with one marked pack and a section of your printed roll. Mark the logo position, the overlap and how far the print may move. Ask for consecutive samples at your smallest and largest pack sizes. Check logo placement as well as loose coils, marked card edges or dented carton corners.
Identify the face that should show the print and where the overlap can land on the finished bundle. Prepare artwork for a pre-printed band trial.
If a connector or projecting hose end affects loading, mark the clear opening before selecting an arch layout. Compare an open arch for coils with a loose lead.
A mixed-product banding enquiry should list each product family separately. A successful card-stack sample does not establish the same setup for coiled cables or delicate cartons.
Review my bundle and band specificationView machine photos in the gallery — The gallery shows a desktop machine, a unit on a stand and examples of banded packs. Specify the desktop or stand-mounted arrangement when requesting a quotation.

Introduction of Automatic OPP/Paper Banding Machine:
Measure the width and height of the finished bundle where the band will sit. The standard KPW-SDJ150 lists a maximum bundle cross-section of 470 × 205 mm. For a soft cable coil, also show the connector position. For a cake carton, measure the closed carton with its insert in place.
Check the standard KPW-SDJ150 band widths and bundle limits before sending the sample brief.
Reconstructed equipment illustration. Final details depend on the selected configuration.
Technology Parameter of Automatic OPP/Paper Banding Machine:
KPW-SDJ150 paper / OPP banding machineBand materialPaper / OPPMaximum bundle size (W × H)470 × 205 mmMinimum bundle size (W × H)30 × 10 mmBand width20 / 30 mmAdjustable tension5–50 NBanding speedLess than 3 seconds per bundlePower80 WPower supplySingle phase, 110 / 220 V, 50 / 60 HzMachine weight35 kgMachine size (L × W × H)642 × 354 × 476 mmThe maximum bundle size refers to the product cross-section. For a different arch opening, send the required clear width and height for a separate quotation. For a printed band, include the artwork repeat and preferred seam location.
Features of Automatic OPP/Paper Banding Machine


Band material and finished-pack examples

Submit the proposed coil and identify any connector or jacket that must avoid band pressure.
On a card stack, mark the band location and check whether cards shift or show edge marks after removal. On a filled, closed cake carton, inspect the lid and corners for dents and check clearance above the product.
Create one test record per product family with material, geometry, band specification and accepted result.
This is a proposed review, not a published test result. Agree the samples, conditions and scope before arranging a trial.
Send the smallest and largest bundle width × height, a photo of each pack, the proposed band material and width, acceptable logo position and required finished packs per hour. Ask for the quoted roll width, arch opening and sample result together.
Send my banding requirementsTwo-year warranty, free replacement parts and their shipping during the warranty period, and lifetime after-sales service.
Mobile:+86-18206519878
Tel:+86-18206519878
Whatsapp:8618206519878
Email:sales@kbwmachinery.com
Add:Wanda Plaza, Fuqiao Street, Rencheng District, Jining City, Shandong Province, China