Add: Wanda Plaza, Fuqiao Street, Rencheng District, Jining City, Shandong Province, China
+86-18206519878
   Home > Our Products > Courier Bag Packing and Sealing Machine for Pre-Made Mailers

Our Products

Courier Bag Packing and Sealing Machine for Pre-Made Mailers

  • Product Item : KPW-1000
  • Category: Our Products
  • Views:467
  • Bag fit: Provide the usable opening and finished bag length
  • Mailer film: Provide the supplier grade and thickness
  • Throughput: Time accepted parcels with your orders
  • Closure: Confirm seam quality on the proposed setup
  • Product description:Pack orders in pre-made courier bags. Compare mailer opening, seal clearance and accepted parcels per hour. Send a bag sample and your bulkiest order for a configuration quote.
  • INQUIRY  

Will the largest order fit the mailer and leave a clean closing seam?

Place your bulkiest order in the smallest mailer you expect to use. Photograph the opening after loading and mark where the seam should land. For a film-to-empty-bag manufacturing project, describe the starting roll and finished empty bag in your enquiry so the team can route it separately.

Request a trial with my mailers

What should a supplier confirm before quoting this station?

Send an unused mailer from each supplier and one example of the bulkiest order. Identify the film grade, thickness, bag format and orientation. Ask the supplier to name the tested roll or bag pack and the loading, closing and labeling steps included in its offer. For a film sold as compostable or recycled, request the film supplier’s supporting document for that exact grade. A successful sealing trial answers a different question: whether that film closes securely on the proposed setup.

Compare the usable bag opening and closing area against your bulkiest filled order before choosing a configuration. Shortlist a poly mailer bagger for your order mix.

Application video: follow the order from loading to a closed mailer. Ask for a trial on the exact configuration in your quotation.

For e-commerce orders, start with the pre-made mailer your operator will fill and the thickest order you normally dispatch. Measure the bag opening inside the seams and its usable depth. Pack the order by hand, lay the mouth flat and mark how much film is left clear for closing. Check the label area on that same filled parcel if a shipping label is required.

Sample diagram showing the usable label face, label size and seam on a filled mailer
On a finished sample, mark a flat area for the label and scan it after normal handling. If the quotation must include printing or label application, list that step separately.

Measure output over a normal run: start when the operator picks up the first order and stop when the last accepted parcel leaves the station. Count reworked packs separately and record bag changes and label handling. Divide accepted parcels by elapsed minutes and multiply by 60 to compare hourly rates using the same scope. Keep the actual timed result and sample mix with the quotation.

Reconstructed courier bagging workstation display with monitor, loading tray and discharge conveyorConfiguration illustration. Use the operator photographs below to identify loading and discharge points. Confirm the proposed layout against your bench or conveyor drawing.

Operators loading and sealing parcels at courier bag packing stations

Mailing bag application collage with apparel, hardware, books and electronics


  1. Operator workload – Time one operator loading orders, changing the bag supply and clearing finished parcels on the proposed configuration.

  2. Seal inspection – Use the intended film and a filled sample. Inspect the cooled seam after the parcel follows your normal handling route.

  3. Bag changeover – Bring the roll you plan to use. Time the change from the last accepted parcel on one roll to the first accepted parcel on the next.

  4. Workstation requirements – Specify any electrical or noise limit at the packing bench. Ask for readings during standby and while packing your sample order.

  5. Order data handoff – List the order fields and status updates your system needs. Use a dummy order to confirm which signals the quoted interface can exchange.


Bagging workstation barcode scanner, control buttons, keyboard tray and conveyor details

Bagging workstation electrical controls, printer, monitor and sealing-bar details

Specify the empty courier bag

Illustrated sample guide: Specify the empty courier bag. bag width, bag length, seam detail.
Send empty bag samples and film specifications. Mark the mouth, seam and intended finished dimensions.
Read the three sample checks
  1. Bag width — Measure the finished empty bag across the face.
  2. Bag length — Measure from the mouth to the opposite seam.
  3. Seam detail — Photograph the seam and intended opening.

Inquiry