Semi Automatic Sleeve Sealing & Shrinking Bottles Packaging Machine

Specify the complete bottle bundle before choosing equipment

Start with filled containers, their closures and labels, then define the number and arrangement in each pack. A machine image does not establish a guaranteed bottle grouping or a complete automatic line.

Discuss your bottle bundle

Keep the group stable

Show whether film alone, a pad or a tray will support the group. Assess loading, transfer and collection with the actual containers.

Define the quoted equipment boundary

List the sealer, tunnel and conveyors, then mark product grouping, tray handling and collection as included or separate tasks.

Send the container drawing, filled weight, row arrangement, bundle dimensions, film and support samples, target bundles per shift and site utilities.

Review the sleeve-system selection checklist

Semi Automatic Sleeve Sealing & Shrinking Packaging Machine

This page presents semi-automatic sleeve sealing and shrink-tunnel equipment. Select a configuration around the complete bundle, film and required handling arrangement. Confirm appearance, stability and product compatibility with representative samples before ordering.

Features

1. Sealing and pack format: The sealing stage forms the film around the proposed bundle. Specify the finished openings, seal position and acceptable appearance; sleeve wrapping does not by itself establish a hermetic or liquid-tight package.
2. Matched shrink tunnel: Confirm the sealer and downstream tunnel models together. Film behaviour, heat exposure and bundle support must be assessed with the actual product; a tunnel rating alone is not a finished-pack result.
3. Operator responsibilities: Identify who groups, loads and collects the products. Use the instructions for the delivered model and agreed conveyor arrangement; a sealing cycle is not evidence that all handling is automated.
4. Output and running-cost assessment: Record accepted bundles, loading and collection time, interruptions and energy use under agreed conditions when comparing systems. No percentage saving or complete-workstation output is established by this description.
5. Size and changeover checks: Check the smallest and largest proposed bundles, feed direction and film specification against the selected equipment. Agree the setup and changeover requirements for each approved combination.FL-7540 conveyor table height: 500 mm or 800 mm. Height can be customized to your installation requirements. Confirm the required height when requesting a quotation.