automatic cuff packing machine mineral water bottle packing machine

Plan water-bottle multipacks around the filled bundle

Describe the bottle, closure and filled pack that must move through the workstation. Bottle count and pack footprint should be agreed before comparing sleeve-sealer configurations.

Discuss your bottle bundle

Include the smallest and largest intended packs

Provide drawings for each row arrangement and the filled bundle weight. Include the actual labels and any pad or tray in the proposed trial.

Count accepted bundles, not conveyor metres

Include grouping, operator loading and pack collection in the output review. Record the format and conditions behind any stated production result.

Send bottle and bundle photos, minimum and maximum assembled dimensions, pack weight, support/film details, required output, table height and destination power supply.

Review the sleeve-system selection checklist

Semi Automatic Sleeve Sealing & Shrinking Packaging Machine

This page presents semi-automatic sleeve sealing and shrink-tunnel equipment. Select a configuration around the complete bundle, film and required handling arrangement. Confirm appearance, stability and product compatibility with representative samples before ordering.

Features

1. Sealing and pack format: The sealing stage forms the film around the proposed bundle. Specify the finished openings, seal position and acceptable appearance; sleeve wrapping does not by itself establish a hermetic or liquid-tight package.
2. Matched shrink tunnel: Confirm the sealer and downstream tunnel models together. Film behaviour, heat exposure and bundle support must be assessed with the actual product; a tunnel rating alone is not a finished-pack result.
3. Operator responsibilities: Identify who groups, loads and collects the products. Use the instructions for the delivered model and agreed conveyor arrangement; a sealing cycle is not evidence that all handling is automated.
4. Output and running-cost assessment: Record accepted bundles, loading and collection time, interruptions and energy use under agreed conditions when comparing systems. No percentage saving or complete-workstation output is established by this description.
5. Size and changeover checks: Check the smallest and largest proposed bundles, feed direction and film specification against the selected equipment. Agree the setup and changeover requirements for each approved combination.FL-7540 conveyor table height: 500 mm or 800 mm; customization is available on request. Confirm the required installation height with the quotation.