Add: Wanda Plaza, Fuqiao Street, Rencheng District, Jining City, Shandong Province, China
+86-18206519878
   Home > Our Products > Strapping Machine > auto small tabletop paper tape banding m

Strapping Machine

auto small tabletop paper tape banding machine strapping price

  • Category: Strapping Machine
  • Views:1907
  • Model:KPW-SDJ150
  • Max. bundle size:470 × 205 mm (W × H)
  • Min.Strapping Size:30*10mm( W*H)
  • Power Supply:1PH,110V/220V,50HZ/60HZ
  • Product description:‌automatic tape banding machine‌ is used to tie and fix products with tape (paper tape, opp tape, kraft paper tape), especially suitable for packaging light items. It uses hot melt bonding, and can us
  • Attachment INQUIRY  

How do I estimate consumable cost when some packs need rebanding?

Measure roll consumption over a representative batch and keep a count of accepted bundles, failed bands and second bands. Divide the batch roll cost by accepted bundles using the same material price in each comparison.

If surface finish matters, inspect edge marks and artwork visibility after removing the trial band. Compare paper and clear OPP bands on the finished pack.

Plan running costs with your own band and workflow data

For a tabletop paper bander, start a cost comparison with the actual bundle, band price and completed-bundle rate. A listed cycle time alone is not a labour-saving calculation.

Review my bundle and band specification

Compare the band contact area

Illustrated sample guide: Compare the band contact area. pack width, pack height, band contact.
Place a strip of the proposed band width on a representative pack. Photograph the face and corner before choosing a trial setup.
Read the three sample checks
  1. Pack width — Measure the packed bundle at the band line.
  2. Pack height — Show both the smallest and largest bundles.
  3. Band contact — Mark the corner, flap or printed area to inspect.

Automatic OPP/Paper Banding Machine


Introduction of Automatic OPP/Paper Banding Machine:

Use the product details below together with the configuration checks for this application.


Reconstructed tabletop banding machine display with arch, control screen and band-roll viewing windowReconstructed equipment illustration. Final details depend on the selected configuration.


Technology Parameter of Automatic OPP/Paper Banding Machine:

KPW-SDJ150 paper / OPP banding machineBand materialPaper / OPPMaximum bundle size (W × H)470 × 205 mmMinimum bundle size (W × H)30 × 10 mmBand width20 / 30 mmAdjustable tension5–50 NBanding speedLess than 3 seconds per bundlePower80 WPower supplySingle phase, 110 / 220 V, 50 / 60 HzMachine weight35 kgMachine size (L × W × H)642 × 354 × 476 mmCustom band and arch configurations must be specified separately when requesting a quotation.


Features of Automatic OPP/Paper Banding Machine

Banding machine feature icons illustrating tape, controls and temperature adjustment


Paper banding examples with reel compartment, foot switch and carry handle details

Small carton secured with a paper band on a tabletop banding machine

Product Banding Effect:

Banding material rolls beside bundles of printed packaging and small cartons

Custom 50–100 mm band-width requests require a separately specified machine and sealing configuration. They are not interchangeable standard widths for the 20/30 mm KPW-SDJ150 chart above.

Company presentation collage with workshop, team, document and shipment photographs

What to agree for this banding job

Count all band uses

Include bands per bundle, setup trials and recorded rejects from an agreed test.

Use complete accepted output

Time preparation, banding and removal together for the proposed workstation.

Sample acceptance plan

Record actual band usage and good bundles over a stated period; keep material and operator assumptions visible.

This is a proposed review, not a published test result. Agree the samples, conditions and scope before arranging a trial.

Send a brief for a matched quotation

Band price/specification, bundle size, bands per pack and present packing method.

Send my banding requirements

Two-year warranty, free replacement parts and their shipping during the warranty period, and lifetime after-sales service.

Inquiry