Add: Wanda Plaza, Fuqiao Street, Rencheng District, Jining City, Shandong Province, China
+86-18206519878
   Home > Our Products > Strapping Machine > Paper and OPP Banding Machine for Cake Boxes, Books and Card Stacks

Strapping Machine

Paper and OPP Banding Machine for Cake Boxes, Books and Card Stacks

  • Category: Strapping Machine
  • Views:1935
  • Model:KPW-SDJ150
  • Max. bundle size:470 × 205 mm (W × H)
  • Min. bundle size:30 × 10 mm (W × H)
  • Power supply:Single phase, 110 or 220 V, 50/60 Hz. Specify your site supply.
  • Product description:Compare paper or OPP bands on filled cake boxes, books and card stacks. Check edge marks, carton clearance and bundle limits before requesting a sample trial.
  • INQUIRY  

How do I choose a band that holds a cake box without denting the lid?

Fill and close the carton as you sell it. Mark where the band crosses the lid and corners. Compare the banded sample with a matching unbanded carton after the same handling and storage. Open both and check lid clearance, corner marks and whether the band slipped. For books and cards, also inspect the cover finish and edge alignment.

If surface finish matters, inspect edge marks and artwork visibility after removing the trial band. Compare paper and clear OPP bands on the finished pack.

Introduction of Automatic OPP/Paper Banding Machine:

The KPW-SDJ150 listing covers paper or OPP banding for grouped paper products, small cartons and other light bundles. Confirm the actual product, material and sealing result with representative samples. Use machine-compatible banding material matched to the quoted width and reel specification.

The banding cycle and product handling are separate parts of the job. Define loading, alignment, starting, any second band and removal for the supplied configuration. Conveyor handling and unattended line integration require a separately confirmed equipment scope; they are not established by the standard machine listing.

For a new job or material change, use the setup and first-pack checklist alongside the correct model-specific instructions.

Send your bundle and band specification for selection


Reconstructed tabletop banding machine display with arch, control screen and band-roll viewing windowReconstructed equipment illustration. Final details depend on the selected configuration.


Technology Parameter of Automatic OPP/Paper Banding Machine:

KPW-SDJ150 paper / OPP banding machineBand materialPaper / OPPMaximum bundle size (W × H)470 × 205 mmMinimum bundle size (W × H)30 × 10 mmBand width20 / 30 mmAdjustable tension5–50 NBanding speedLess than 3 seconds per bundlePower80 WPower supplySingle phase, 110 / 220 V, 50 / 60 HzMachine weight35 kgMachine size (L × W × H)642 × 354 × 476 mmThe chart describes the standard machine cycle. For output planning, time a complete run with your carton or stack, including loading, any second band and removal. Specify the proposed band width and any different arch opening in your request.


Features of Automatic OPP/Paper Banding Machine

Banding machine feature icons for band feeding, tension and temperature adjustment


Banding examples and details of the reel access, guide, foot switch and handle

Small carton secured with a paper band on the banding-machine table

Band rolls and finished-pack examples

Paper band rolls and examples of banded cartons and printed items

Company profile with workshop, team, documents and packing photographs

Compare the band contact area

Illustrated sample guide: Compare the band contact area. pack width, pack height, band contact.
Lay strips of the proposed widths across a representative pack. Mark the seam and any area where the band might cover artwork, a barcode or an opening tab. Photograph the face and corner for the trial.
Read the three sample checks
  1. Pack width — Measure the packed bundle at the band line.
  2. Pack height — Show both the smallest and largest bundles.
  3. Band contact — Mark the corner, flap or printed area to inspect.

Inquiry